- Once the structure is checked according to Codes or Standards, elements that are OK and NO OK are shown, as well as the safety factors/Margin of Safety.
- Envelopes: after checking different load combinations, an envelope of these checking results previously obtained can be generated.
AISC-LRFD
- Tension
- Buckling Compression + Bending
- Buckling Compression + Bending + Torsion
- Bending
- Shear
- Plate Girder
- Bending + Axial
- Bending + Axial + Shear + Torsion
Eurocode 3
- Class 1, Class 2, Class 3 and Class 4 sections.
- Tension (1D)
- Compression (1D)
- Bending (2D)
- Shear (2D)
- Bending + shear (2D)
- Bending + Axial (3D)
- Bending + Axial + Shear (3D)
- Compression Buckling (1D)
- Lateral Buckling (2D)
- Lateral Buckling in Bending + Tension (3D)
- Buckling in Bending + Compression (3D)
British Standard 5950 (1985/2001)
- Bending
- Lateral Torsional Buckling
- Tension
- Compression Buckling
- Tension Member with Moments
- Compression Members with Moments
EA-95
- Tension
- Compression
- Bending
GB50017
- Bending
- Shear
- Bending + Shear
- Axial
- Bending + Axial
- Compression Buckling
CTE DB SE-A
- Tension
- Compression
- Bending
- Shear
- Bending + Shear
- Bending +Axial
- Bending + Shear + Axial
- Compression members with constant cross-section
- Lateral-torsional buckling
- Buckling in Bending + Axial
- Buckling in Bending + Axial compression
Indian Standard IS 800
- Tension
- Compression
- Bending
- Shear
- Bending + Shear
- Lateral Torsional Buckling
- Axial Force with Moments Governed by Material Failure
AISC-ASD
- Bending
- Shear
- Axial Compression + Bending
- Axial Tension + Bending
- Buckling Compression + Bending
- Buckling Compression + Bending + Torsion
ANSI/AISC N690
- Tension
- Bending
- Shear
- Axial compression + Bending
- Axial tension + Bending
- Buckling Compression + Bending
- Buckling Compression + Bending + Torsion
Predesign of concrete rectangular sections
It allows carrying out a predimensioning of the necessary reinforcement for rectangular cross sections.
Checking
CivilFEM checks the structure with initial amount of reinforcement and shows the safety factor of each element.
Design
CivilFEM designs the structure taking into account different loads and combiantions and gives the optimize reinforcement. The available results of a concrete checking or design are grouped in beam results (beam cross sections and solid section) and shell results (including results for shell element vertices).
Ultimate Limit State Checking
Ultimate Limit State Checking & Design and Serviceability Limit State (Cracking) checking according to the following codes:
- ACI 318
- Eurocode No. 2
- British Standard 8110
- Australian Standard 3600
- Chinese Code GB 50010
- EHE
- CEB-FIP
- Brazilian Code NBR6118
- AASHTO Code for Highway Bridges.
- SP 52-101 IS456
- Indian Standard IS 456
Checking and design options
Axial+Biaxial Bending Interaction Diagram (2D/3D)
- Axial+ Biaxial Bending Checking Axial+ Biaxial Bending Design
- Shear & Torsion Checking
- Shear & Torsion Design
- Shell Reinforcement
- In-plane shear checking and design